Silicone Pull Plugs SPP Series
Recommended for masking holes when hole can be reached from both sides when powder coating. When pulled through holes, the larger diameter (A) stretches and diameter compresses until released providing a tight seal, even helping to plug the thread chamfers on threaded applications. The major diameter (A) of the pull plug should be at least 4-5% larger than the hole to be plugged. Temperature resistant up to 315 C / 600 F and durable for repeat use.
Colour: See Chart
Select a part based on your application needs. If you need help selecting the correct part, please call our Customer Service at either of the phone numbers listed above. Shipping for samples is free.